17
Starting Up
2.1.2
Refueling the engine
(only PowerBoss Collec-
tor 34 G)
Unscrew the fuel tank cap
(Fig. 7/7) and fill approx. 2.5
l
gasoline.
Screw the fuel tank cap back on.
Only refuel the machine when
the engine has cooled down.
Otherwise, any spilled gaso-
line can evaporate if it lands on
hot machine parts. Health haz-
ard through inhaling vapors!
Refueling must not be carried
out in closed rooms.
Refueling may only be carried
out when the engine is
switched off! Remove the igni-
tion key.
It is forbidden to smoke or use
fire when refueling or working
on or near components con-
taining fuel.
Wipe up any spilled fuel!
Wipe up spilled fuel with a cloth
and dispose of the cloth ac-
cording to the applicable envi-
ronmental laws.
2.1.3 Checking the oil level
(only PowerBoss Collec-
tor 34 G)
Engine oil is filled at the factory. As a
precaution, however, check the oil level
again on site, refer to Section 5.4.1.
2.1.4
Connecting the batteries
(only PowerBoss Collec-
tor 34 B)
Before starting up for the first time, con-
nect the positive cable of the device as
illustrated in Figure 5 to the positive
pole (Fig.
5/1)
of
the
batteries
in
the
de-
vice.
2.1.5
Initial battery charge
(only PowerBoss Collec-
tor 34 B)
Before starting up the machine for the
first time, the batteries used must be ful-
ly charged by completing the initial bat-
tery charge, refer to Section 5.5.1. Pow-
erBoss assumes no liability for damage
to the battery resulting from failing to
carry out the initial battery charge prop-
erly.
Risk of explosion! When charg-
ing the batteries, there must be
sufficient ventilation in the
charging area.
Fig.
5
1
