PB50 Low Profile Manual
Original instructions
2019
5
4)SPECIFICATION
Maximum hole cutting capacity in .2/.3C steel =
2”
dia. x
2”
deep
Arbor bore = 3/4" dia.
Motor Unit
Voltages
120V 50-60Hz
230V 50-60Hz
Normal full load
10 A
6 A
Electro Magnet
0.53 A
0.28 A
Size
7 -
9/16”
long
3-
1/8”
wide
Holding Force at 20°C with 25mm
minimum plate thickness
The use on any material less than 25mm thick will progressively
reduce the magnetic performance. If possible, substitute
material should be positioned under the magnet and work
piece to equate to a suitable material thickness. If this is not
possible, an alternative secure method of restraining the
machine MUST be used.
2250 lbs
Overall Dimensions
Height - minimum
7
–
1/16”
Width (including Capstan fitting)
3
–
15/16”
Length Overall (including Guard)
13
–
1/8”
Nett Weight
24 lbs
PB50 LOW PROFILE
1
PB50 LOW PROFILE
3
Vibration total values (triax vector sum) in accordance with
EN62841-1:
Vibration emission value
Vibration emission value
Level of sound pressure in accordance with EN62841-1:
Ear and eye defenders must be worn when operating this machine. Wear gloves to protect hands when operating the
machine.
These tools are UK designed and manufactured with globally sourced components and conform to the requirements of
EEC Document HD.400.1 and BS.2769/84
Suitable only for a single phase 50-60Hz A.C. power supply
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will earth back through the magnet and cause irreparable damage.
WARNING: THIS APPLIANCE MUST BE EARTHED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE
