PB50 Low Profile Manual
Original instructions
2019
3
1)
INTENDED USE
The intended use of this magnetic drill is to drill holes in ferrous metals. The magnet is used to hold the drill in place
whilst the drill is functioning. It is designed for use in fabrication, construction, railways, petrochemical and any other
applications when drilling ferrous metal.
Any deviation from its intended use will not be covered by warranty.
2) GENERAL SAFETY RULES
WARNING!
Read and understand all instructions. Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
Work area
1.
Keep your work area clean and well lit
. Cluttered benchesand dark areas invite accidents.
2.
Do not operate power tools in explosive atmospheres, suchas in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust orfumes.
3.
Keep bystanders, children and visitors away while operatinga power tool.
Distractions can cause you to lose control
Electrical safety
1.
Grounded tools must be plugged into an outlet properly installed andgrounded in accordance with all codes and
ordinances. Neverremove the grounding prong or modify the plug in any way. Do notuse any adaptor plugs. Check
with a qualified electrician if you are indoubt as to whether the outlet is properly grounded.
If the tools
shouldelectrically malfunction or break down, grounding provides a lowresistance path to carry electricity away from
the user.
2.
Avoid body contact with grounded surfaces such as pipes, radiators,ranges and refrigerators.
There is an increased
risk of electric shock ifyour body is grounded.
3.
Don’t expose power tools to rain or wet conditions.
Water entering apower tool will increase the risk of electric
shock.
4.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from
heat, oil, sharp edges or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of
electric shock.
5.
When operating a power tool outside, use an outdoor extension cord
marked” W
-A
”
or
” W”
.
These cords are rated
for outdoor use and reduce the risk of electric shock.
Personal safety
1.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while
tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away
from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
3.
Avoid accidental starting. Be sure switch is off before plugging in.
Carrying tools with your finger on the switch or
plugging in tools that have the switch on invites accidents.
4.
Remove adjusting keys or switches before turning the tool on.
A wrench or a key that is left attached to a rotating
part of the tool may result in personal injury.
5.
Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of
the tool in unexpected situations.
6.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hardhat, or hearing
protection must be used for appropriate conditions.
Tool use and care
1.
Use clamps or other practical way to secure and supporttheworkpiece to a stable platform.
Holding the work by
