SYSTEM DIAGRAMS
1. Using One Pair of Inputs
When only one pair of inputs is available, input the signal to the FRONT input section and set
the SUBWOOFER INPUT switch to FRONT and the INPUT MODE switch to FRONT. This will
allow the signals to be fed internally to the SUBWOOFER and REAR sections to give proper
results. The FREQUENCY MULTIPLIER switch should be in the X1 position on both FRONT and
REAR.
2-channel amp for FRONT
2-channel amp for REAR
mono amp for SUBWOOFER
IMPORTANT: Correctly set the switches as shown in the diagrams below.
11
