PowerBass XL-PS200, Инструкция по применению

Страница: 5 / 12

XL-PS200 WIRING DIAGRAM
YELLOW WIRE - 12V Constant Power Lead
BLACK WIRE - Ground Lead
RED WIRE - 12V Ignition Lead
XL-PS200 WIRING INSTRUCTIONS
1) Connect the yellow power wire to the battery positive.
2) Connect the red wire to the ignition switch. This will turn your pods off from the ignition when your
motorcycle or vehicle is turned off.
3) Connect the black ground wire to directly to the battery negative.
4) Plug the output connector cable into the input cable of the second speaker pod.
5
Fig. 4