PowerBass STA-8, Руководство пользователя

Страница: 12 / 20

Low Level Input and RCA Interconnect Wiring
(fig 5)
For radios that have RCA line outputs. You will need to connect the low-level RCA style inputs from the STA
to the line-outputs from the radio (source) via an RCA interconnect commonly called a “stereo patch cord”.
Choose the correct length and style of RCA interconnects for your needs. Always use high quality RCA audio
cables (not supplied) for signal connections—those with multiple layers of shielding or a twisted pair variety
for better noise rejection.
Be extra careful when routing your RCA audio interconnect cables. Car environments are notorious for poorly
insulated wires. This means that hiss, engine noise and fan noise can be easily picked up through RCA
cables if run incorrectly. Take care to make sure the power and audio signal are not on the same side of the
vehicle and they do not cross each other.
Fig.5 Low Level Connections
NOTE:
Use 8ga power/ground wire for BATT+ and GND connections