POWERBASS AMPLIFIED BASS SYSTEM FEATURES
Built-in High Powered Amplifier:
Contains a high power Class A/B monaural amplifier
complete with chassis mounted adjustable Gain, Low Pass Filter and Bass Eq controls for sonic
integration into most existing factory or aftermarket car stereo systems and engineered perfectly
to power the subwoofer.
Heavy-duty Box Design:
This enclosure is constructed from non-resonant 5/8” panels that
have been glued, braced and sealed. Each box is finished in a stylish two tone RFG aviation
grade vinyl covering.
Bass Reflex Single Port System:
Utilizing a Bass Reflex design offers increased efficiency
of low frequencies. To accomplish this, a flared Venturi port tube is used for exact tuning and
virtually no port noise (breathing) resulting in tight bass.
Remote Subwoofer Level Control:
This wired remote functions as a Bass Level control and
can provide 0-12dB of gain at 45Hz. The remote will not increase the output beyond the GAIN
setting on the amplifier. Supplied with 18ft of cable it can reach your dash even when the bass
enclosure is mounted in the trunk.
Polypropylene Cone with Rubber Surround:
A thermoplastic polymer cone was selected to
help resist moisture and other elements while the rubber surround offers more excursion as well
as protection against deterioration than other materials.
KSV High Temperature Voice Coil:
These specially designed resin coated high temperature
Kapton® voice coils measure a full 2-inches in diameter to ensure high power handling and
precise linear excursion while maximizing thermal heat dissipation.
Additional Features:
Vinyl enclosure, professional mounting hardware and wiring harness
adds further value to your investment.
Kapton® is a registered trademark of E.I. du Pont de Nemours and Company
3