Remote Level Controller
Your PowerBass RTA enclosure includes a wired Remote Level Subwoofer control module. It uses
standard telephone wire and telephone RJ45 connectors. To connect the Remote Subwoofer Gain
control to the amplified enclosure, simply insert one end of the telephone plug into the REMOTE
gain port. Plug the other end into the back of the remote module. Mount the module within easy
reach or under your dash. (Fig 10)
NOTE: DO NOT
plug in or disconnect the remote bass level controller when the amplifier is on!
Break In Period
To get the most from your woofer we recommend a "break-in" period of at least 40 hours (typically
2 weeks) at no more than 1/3 of maximum volume.
During this time the cone and spider assembly will gradually break in resulting in greater performance
and more listening enjoyment.
Fig.10 Connection with RJ45 Jack
Product Disposal –
Certain international, national and/or
local laws and/or regulations may apply regarding the disposal
of this product. For further detailed information, please contact
the retailer where you purchased this product or the PowerBass
Importer/Distributor in your country.