PowerBass ACS-1000D, Руководство пользователя

Страница: 6 / 24

CONTROL PANEL LAYOUT
NOTE: Panel Layout and Controls may differ by model.
1. REMOTE LEVEL PORT
This is the connector port for the optional Remote Gain Control. Now the amplifiers secondary gain circuit can
be adjusted from the driver’s seat. Requires PB-GAIN1 accesory.
2. HIGH INPUT
Allows you to connect speaker output from factory radio to amplifier without the use of a low level convertor.
3. LINE IN (RCA) Jacks
These RCA style input jacks are for use with source units that have RCA line level outputs. A source unit with a
minimum output of 250mV is required for proper operation. However, this input will accept levels up to 6Vrms.
4. BASS EQ Switch
This equalization circuit is used to enhance the low frequency response of the vehicle’s interior. Selectable for
12dB of boost centered at 45Hz, the BASS EQ can be adjusted to meet your own personal taste.
Fig.2 Panel Layout
SPEAKE R
SU BW OOFER
OUTPU T
FUSE
25 A 25 A
BATT +G ND RE M
STATUS
POWE R
ACS-500D
LO W
INPU T
R
L
HIGH INPUT
RL
GAIN
MI NM AX
SUBSONI C
15Hz 50H z
REMO TE
LEVEL
0dB1 2dB
BA SS EQ LP F
30Hz 250H z
1 OHM Stable • Mono Class D Amplifier