PowerBass 2XL-1004D, Инструкция по применению

Страница: 6 / 20

WIRING GUIDELINES
It is highly recommended that you seek an authorized PowerBass dealer to properly setup, wire
and install your woofers for maximum performance.
All PowerBass Xtreme subwoofers use dual voice coils. The use of dual voice coils offers you more versatility
in system configuration. It is important to know the limits of your amplifier to optimize its performance. It is
always better to use your subwoofer in a mono / bridged mode if your amplifier has the capabilities. There
are basically four different types of wiring configurations: Series, Parallel, Series-Parallel or Parallel-Parallel.
It is possible to change the impedance or load by how the speakers are to be wired and by the quantity of
woofers used.
Parallel wiring a dual 4 ohm sub = 2 ohm
PARALLEL
SERIES
DUAL VOICE COIL WIRING
Parallel-Parallel wiring two dual 4 ohm subs = 1 ohm Series-Parallel wiring two dual 4 ohm subs = 4 ohm
Series wiring a dual 4 ohm sub = 8 ohm
PARALLEL-PARALLEL
Amplifier
SERIES-PARALLEL
Amplifier
Amplifier Amplifier
NOTE: Never connect only one coil of a Dual Voice Coil (DVC) speaker. BOTH voice coils must be
connected to the amplifier