PowerBass 2XL-1004D, Инструкция по применению

Страница: 5 / 20

POWERBASS XTREME 2XL WOOFER FEATURES
IMFPM Cone
A new material designed for high powered/high pressure environments in which a FP Matrix “Foam Sandwich”
was created to provide a very rigid and stable surface that will prevent cone krumpling while increasing bass
response.
Custom Aluminum Basket with Voice Coil Perimeter Aerovents:
This cast aluminum basket is
manufactured to the highest quality standards to ensure maximum excursion, exceptional alignment of the
subwoofer’s motor structure and moving parts while providing an extremely rigid, non-resonant frame.
Pro-Lock Input Terminals:
Giving your woofer all of the current and voltage that it needs to perform
up to maximum capability is why we have designed these Pro-Lock terminals. They insure a tight and energy
efficient connection between your amplifier and the woofers voice coil. They also simplify wiring in multiple
speaker installations.
Vented BKSV Voice Coil Former with Bonder 360 Adhesive:
These specially designed Kapton™
coils are coated with Hernon® Bonder 360 to provide a thermal shock resistant bond that can withstand
temperatures of 600˚F (316˚C). This dramatically increases heat dissipation and increases power handling.
Xtra Xtra Large Motor Structure:
Just like a cars’ engine, the motor structure of a woofer drives the
cone. This dual stack motor will allow your 2XL woofer to handle lots of power while delivering accurate linear
movement for tight deep bass.
Custom Billet Aluminum Trim Ring:
Clamps the surround for a better grip on the frame by holding
it in-between the ring and frame. This ensures the surround will stay in place during high excursion of the
woofer cone.
U-turn High Roll Santoprene Surround:
This high roll surround is used to ensure long and linear travel
throughout the entire excursion range resulting in more bass output and higher SPL. The nonstandard "U"
design also gives the woofer more cone area to move more air and make more bass.
Hernon 360 Bonder is a product of Hernon Manufacturing, Inc.
Kapton® is a registered trademark of E.I. du Pont de Nemours and Company
Santoprene® is a registered trademark of ExxonMobil Chemical Co.
5