18
Removing or installing the battery pack
WARNING!
Always release the on/off trigger before
insertion or removal of the battery pack.
To remove the battery pack: Depress button (A) on the end of the
battery pack, and then remove the pack from the tool.
Install the battery pack: Align the ribs on both sides of the battery
pack with the slots in the housing, and slip it into place. Always
insert it all the way until it locks in place with a click sound. If not,
it may accidentally fall out of the tool, causing injury to you or
someone around you.
Install the guard
1. Remove four mounting screws from the motor housing.
Note:
They are pre-mounted on the motor housing by the
factory to help the end-user find them quickly and indicate to the
end-user where these four screws should be used.
2. Put the safety guard onto the motor housing.
3. Fix the safety guard in place by using these four screws.
A
