19
4) Move the choke lever (F) to the position.
5) Pull the starter grip until the engine runs.
6) Let it run for about 30 seconds then operate the
hedge trimmer.
ATTENTION!
Don’t touch the blade.
2b Starting under warm conditions
1) Set the switch (A) to I (on).
2) Set the choke lever (F) to ( ).
3) Quickly pull the starter grip (B) until the engine runs.
Step 3 - Change rear handle position
Pull the handle lock switch (C) to enable rotation of the handle.
There are three working positions (0°, 90°, -90°).
C
Pull
A
2a & 2b
1
2
3
4
5
6
I
STOP
I
STOP
B
F
Set START/STOP
switch to START
position
Cold
Hot
Press primer bulb
5-6 times
Pull cord 3-4 times
so that motor turns
over (the engine
may start
）
FULL CHOKE
RUN position
Pull cord until the
motors runs
