11
• If you want to remove some defects or
clean the machine of jammed pieces of
wood, you must switch it off first.
• Machine adjustment, measuring, cleaning,
etc., is allowed only when the engine is
switched off.
• Do not leave an active engine unsupervised.
• After a repair or maintenance of safety or
protective devices, the devices must be
reinstalled correctly in the machine.
• It is essential to know the regulations
regarding accident prevention that are
valid in a specific workplace, and all
other generally acknowledged safety
regulations.
• When working, pay attention to stability
and maintain good balance.
• Check the machine on a regular basis for
signs of wear and damage.
• Before using the machine, you must
check safety devices. Make sure that
components that might seem slightly
worn or damaged still perform correctly.
• Check if all movable parts work perfectly.
Concentrate mainly on the damaged and
jammed components. All components
must be installed properly and must
comply with conditions for trouble-free
operation.
• Unless stated otherwise in the instruction
manual, the damaged switches and safety
devices should be repaired or replaced in
an authorised service centre.
