PowerBase 577152, Инструкция по эксплуатации

Страница: 19 / 32

19
Step 2 - Pull the cord handle
With the right hand, slowly but firmly pull the starter handle and
rope from the pull cord guide until you feel resistance, then pull
briskly. If the engine fails to start after three pulls, repeat the
start process. When the engine starts, gently return the starter
rope to the pull cord guide.
Step 3 - Self propelled mowing
Engage the propulsion lever, the mower will move forward
automatically, release the propulsion lever, the mower will stop
moving.
Step 4 - To stop, release the stop/start bar
Failure to start
If the engine won’t start after you have operated the starter
several times, the engine may be flooded with excess fuel.
Use the following procedure to clean and start a flooded engine:
A. Release the stop/start bar.
B. Remove the spark plug, dry it, and then reinstall it.
Install the spark plug carefully by hand, to avoid cross-threading.
After the plug is seated, tighten it 1/8 to 1/4 turns with the
socket spanner to compress the washer.
C. Pull the stop/start bar towards the upper handle.
D. Operate the starter, as described in steps 1-2.