20
Cleaning
Replacing the trimming assembly
Maintenance
Before undertaking any work on the trimmer, always disconnect the
plug from the mains socket.
Any work that is not described in these Instructions must be carried
out by a qualified technician. Only use original parts and be very
careful with the line cutter during installation work. Danger of injury!
Do not spray water onto the trimmer and do not clean it under a
flowing tap. This would result in the danger of an electric shock and
the trimmer could be damaged.
Always keep the trimmer clean. Do not use cleaning agents and solvents.
• After the work has been completed, remove all grass and soil from the
cutting device and the protective cover.
• Ensure that the ventilation slots are always clean and free of grass.
• Clean the trimmer with a soft brush or a cloth.
Never manipulate the cutting device by inserting worn out original
or non-approved parts. Only use original spare parts. Never use
metal lines. The use of non-approved parts can result in serious
personal injury and cause irreparable damage to the trimmer, and
the warranty will become void.
• Disconnect the plug from the mains socket.
• Turn over the trimmer so that the cutting head (15) is facing upwards.
Fig. 11
10
13
14
12
11
15
