Poweramp RCR Series страница 9 Скачать руководство пользователя

Страница: 9 / 60

4111-0044 — June 2021

7) Loading dock safety equipment should never

be used outside of its vertical working range, or

outside the manufacturer’s rated capacity. It shall

also be compatible with the loading equipment

and other conditions related to dock activity.

Please consult the manufacturer if you have any

questions as to the use, vertical working range or

capacity of the equipment. Only properly trained

and authorized personnel should operate the

equipment.

8) It is recommended that the transport vehicle

is positioned as close as practical to the dock

leveling device and the dock leveling device is

centered in the door opening as much as possible.

When an industrial vehicle is driven on or off a

transport vehicle during loading and unloading

operations, the transport vehicle parking brakes

shall be applied and wheel chocks or a restraining

device that provides equal or better protection of

wheel chocks shall be engaged. Also, whenever

possible, air-ride suspension systems should have

the air exhausted prior to performing said loading

and unloading operations.

9) In order to be entitled to the benefits of the

standard product warranty, the dock safety

equipment must have been properly installed,

maintained and operated in accordance with

all manufacturer’s recommendations and/

or specified design parameters and not

otherwise have been subject to abuse, misuse,

misapplication, acts of nature, overloading,

unauthorized repair or modification, application in

a corrosive environment or lack of maintenance.

Periodic lubrication, adjustment and inspection

in accordance with all manufacturers’

recommendations are the sole responsibility of the

owner/user.

10) Manufacturer’s recommended maintenance and

inspection of all dock leveling devices shall be

performed in conformance with the following

practices: A planned maintenance schedule

program must be followed, only trained and

authorized personnel shall be permitted to

maintain, repair, adjust and inspect dock leveling

devices, and only the use of original equipment

manufacturer parts, manuals, maintenance

instructions, labels, decals and placards or

their equivalent. Written documentation of

maintenance, replacement parts or damage

should be kept. In the event of damage,

notification to the manufacturer is required.

11) Loading dock devices that are structurally

damaged or have experienced a sudden loss of

support while under load, such as might occur

when a transport vehicle is pulled out from under

the dock leveling device, shall be removed from

service, inspected by a manufacturer’s authorized

representative, and repaired or replaced as

needed or recommended by the manufacturer

before being placed back in service.

OWNER’S/USER’S RESPONSIBILITIES

Содержание RCR Series





























































Результаты поиска

Содержание RCR Series

Отзывы:

Похожие инструкции для RCR Series

Бренды по названию

Популярные бренды

Poweramp RCR Series, Инструкция для владельца и пользователя

Результаты поиска

Содержание RCR Series

Отзывы:

Похожие инструкции для RCR Series

Бренды по названию

Популярные бренды