3. Turn counterclockwise the filter to seperate the filter
and filter guard.
2
4. Emptying the dust container and filter contents into
the a waste basket.
11.2 CLEAN THE FILTER
NOTE
Allow the filter to dry before you store or picking up
debris.
Often clean your filter to maintain peak vac
performance.
Clean a dry filter:
• Cleaning should be done outdoors and not in the
living quarters.
• You can use a small brush to clean the dust and
debris.
• For thorough cleaning of dry filter with fine dust (no
debris), run water through it as described under
"Cleaning A Wet Filter"
Clean a wet filter:
1. Remove the filter from the machine.
2. Run water through the filter from a hose or spigot.
NOTE
Check the filter for tears or small holes after cleaning.
Do not use a filter with holes or tears in it. Even a
small hole can allow dust to come out of your
machine. Replace it immediately.
12
STORE THE MACHINE
NOTE
Clean the machine before storage.
1. Remove the battery pack.
2. Let the motor cool.
3. Check that there are no loose or damaged
components. If it is necessary, replace the damaged
components, tighten screws and bolts, or speak to a
person of an approved service center.
4. Store the machine in a cool and dry location.
13
TROUBLESHOOTING
Problem
Possible cause
Solution
The machine
doesn't work.
The switch or
motor is defec-
tive.
Speak to service
center.
Dust discharges
from exhaust.
The filter has
damage.
Replace the fil-
ter.
The filter isn't in-
stalled.
Properly reinstall
the filter.
The filter is not
functional.
Clean or replace
the filter.
The filter clogs.
Clean or replace
the filter.
Loss of suction
The hose con-
nection loose.
Tighten the hose
connection.
The filter clogs.
Clean or replace
the filter.
The collection
tank is full.
Empty the col-
lection tank.
The hose has
damage.
Replace the
hose.
Static shock
The environment
is dry.
Add moisture to
air (if practical,
use a humidifi-
er).
14
TECHNICAL DATA
Voltage
20 V
Vacuum speed
22500 RPM
Weight (without battery
pack)
2 lbs. (0.9kg)
Battery model
BAP702
Charge model
CAP802
The recommended ambient temperature range:
Item
Temperature
Machine storage tempera-
ture range
-4°F (-20°C) - 158°F
(70°C)
Machine operation tem-
perature range
-4°F (-20°C) - 104°F
(40°C)
Battery charging tempera-
ture range
39°F (4°C) - 104°F (40°C)
Charger operation temper-
ature range
39°F (4°C) - 113°F (45°C)
8
English
EN
