Power works 2200973, Инструкция по эксплуатации

Страница: 5 / 23

screws and bolts, or speak to a person of an approved
service center.
5. Remove keys or tools used for maintenance.
6. Store the machine:
• indoors and out of children.
• prevent from inclement weather.
7 TROUBLESHOOTING
Problem Possible cause Solution
The motor shuts
down whilst work-
ing.
The battery pack is
not installed tight-
ly.
Make sure that
you tighlty instal-
led the battery
pack in the ma-
chine.
The battery pack is
out of power. Charge the battery
pack.
The machine has
damage. Do not use the ma-
chine and speak to
service center.
The machine
smokes during op-
eration.
The machine has
damage.
1. Immediately
stop the ma-
chine.
2. Remove the
battery.
3. Speak to serv-
ice center.
The motor is on,
blades do not
move.
The machine has
damage.
Do not use the ma-
chine and speak to
service center.
The blades are
blocked.
Remove battery
then clear block-
age from the
blades.
Too much noise
and/or vibration is
experienced while
working.
The parts are loos-
en.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
The parts have
damage.
Do not use the ma-
chine and speak to
service center.
8 TECHNICAL DATA
Voltage 40V
No load speed 3000
(±10%) /min
Blade speed 3000
(±10%) /min
Blade length 540 mm
Cutting capacity 27 mm
Weight (without battery pack) 3.84 kg
Measuered sound pressure level 80 dB(A),
K
PA
=3 dB(A)
Guaranteed sound power level 99 dB(A)
Vibration <2.5 m/s
2
Uncertainty 1.5 m/s
2
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Propellergatan 1, 211 15 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Peter Söderström
Address: Propellergatan 1, 211 15 Malmö, Sweden
Herewith we declare that the product
Category: Pole Hedge Trimmer
Model: PTF314 (2300073)
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
• EN 60745-1,EN 60745-2-15, EN ISO 10517,EN 55014-1,
EN 55014-2,EN ISO 3744,ISO 11094,IEC 62321-3-1,
IEC 62321-4,IEC 62321-5,IEC 62321-6,IEC 62321-7-1,
IEC 62321-7-2,IEC 62321-8
Measured sound pow-
er level: L
WA
: 92.4 dB(A)
6
English
EN