The thermostat operated
Turn the thermostat and listen if
there is open/ close voice. If there is
no click and the thermostat is not
damaged, the heater will automatic
switch on when the appliance
cooled down.
The manual reset cut-out
operated.
Disconnect the power, held the 2
stick and insert it in the manual reset
hole on the control panel, press
down the reset button and connect
the circuit
Abnormal noise
The appliance is not level
Put the heater on a level surface
the switch delay time is
very long, or the power can
not be cut off
The ambient temperature
is high
Use the appliance under 25
ambient.
When
the
room
temperature is higher than 25
and the delay time is too long, or
delay circuit doesn’t switch off the
appliance, pull out the plug
Содержание EL 3
Страница 1: ...Industrial fan heater EL 3 User manual ...