Power Tec EL 3, Руководство пользователя

Страница: 3 / 7

Control Panel
Four levels and five positions rotary switch, which can be turned from 0 to 360 degree
clockwise or counter clockwise, the first level is ventilator only, the second level is
1,5KW, the third level is full power input. You can adjust the level clockwise or reverse.
0 40
°
C adjustable thermostat to control the room temperature the thermostat button
can be turned from 0 to 270 degree.
THERMOSTAT INSTRUCTIONS
At first turn the thermostat to “Max” and let the heater operate with full power input.
When the room temperature reaches the required value, turn the thermostat to left until
it switches off.
The thermostat will then switch on and off automatic to control the room temperature
according to the preset value and keep the room temperature constant.
Manual reset thermal cut-out
By overheating or abnormal operation and meanwhile the thermostat fails to work, the
manual resetting thermal cut-out will act and shut down the appliance. Remove the plug
from the socket and let the appliance cool down, then use the provided steel pin to
touch the manual resetting button. When you hear a clear click it means the electric
circuit is put through, put the plug back into the socket and switch the heater on. see the
figure manual “RESET” button
When using the heater for the first time, you may notice a slight emission of smoke. This
is quite normal and it stops after a short time. The heating element is made of steel and
was coated with a layer of protection oil by production. The smoke is caused by the left
oil when heated.