Safety Precautions:
• Eye and face protection
plus work gloves and suitable work clothing
must be
used
.
Never
wear loose clothing or jewellery that could be trapped by moving
parts.
• Dust hazard
: a suitable-grade dust mask or respirator
must be used
for any
dust-generating operations.
• Vibration hazard
: exposure to vibration can cause damage to nerves
and blood supply of the hands and arms. If you experience numbness,
tingling, pain or whitening of the skin in fingers or hands, stop using the tool
immediately.
• Noise hazard
: unprotected exposure to high noise levels can cause hearing
loss and tinnitus (ringing or buzzing in the ears). Wear suitable ear protection
as required by occupational health and safety regulations.
• Do not attempt to remove or change a polishing pad until the tool has been
disconnected from the compressed air supply.
• In use, if an in-line oiler is not installed, add a few drops of air tool lubricating
oil daily.
• Never carry an air tool by the hose.
• Keep the instrument clean and well-maintained. Store in supplied case when
not in use.
Our products are designed to be used correctly and with care for the purpose for which they are
intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and
the Tool Connection cannot be held responsible for any damage to personnel, property or equipment
when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been designed
to offer general guidance for a particular tool’s use and while all attention is given to the accuracy
of the data no project should be attempted without referring first to the manufacturer’s technical
documentation (workshop or instruction manual) or the use of a recognised authority such as
Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
This item contains consumable elements that are
NOT
covered by the
Tool Connection guarantee. For spares contact our service department
direct on:
+44 (0) 1926 818186
Guarantee
www.power-tec.co.uk
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T
+44 (0) 1926 815000
F
+44 (0) 1926 815888
www.toolconnection.co.uk
92559_Instructions_V1
