Power Systems Inc.
www.power-systems.com
1-800-321-6975
Copyright © 2005 by Power Systems Inc.
Rev B 10/07
POWER SYSTEMS, INC. ASSUMES NO LIABILITY FOR INJURY OR DAMAGES THAT
MAY OCCUR WITH USE OF THIS PRODUCT. POWER SYSTEMS WARRANTS THAT
THE DESIGN OF THE VERSAROLL/STABILITY ROLLS IS IN CONFORMANCE WITH
ALL APPLICABLE DESIGN STANDARDS, RULES, SPECIFICATIONS, REGULATIONS
AND PRODUCT QUALITY STANDARDS APPLICABLE TO SUCH
VERSAROLL/STABILITY ROLLS, THE INDUSTRY USING THE VERSAROLL/STABILITY
ROLLS AND AT THE TIME OF SALE, THE VERSAROLL/STABILITY ROLLS SHALL BE
FREE FROM DEFECTS IN WORKMANSHIP OR MATERIALS. POWER SYSTEMS
EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND RELATED TO THE
VERSAROLL/STABILITY ROLLS OR THEIR SPECIFICATIONS OR DESIGNS, WHETHER
EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
VERSAROLL™ 50cm & 60cm
VersaRolls™ offer a dynamic training environment for a variety of exercises at a
variety of difficulty levels. Serious injury can occur when not used properly.
Power Systems VersaRolls™ are intended for use only as described in the
enclosed instructions. Other uses are not recommended. In addition to the
enclosed instructions for use, please observe the following precautions each and
every time before using your VersaRoll™.
Inflation Instructions
The centimeter size of your VersaRoll™ refers to the
maximum
inflated
cylindrical diameter of the roll. Do NOT inflate the roll larger than the indicated
roll size or the roll will become weaker, increasing the risk of roll failure/bursting.
IMPORTANT: Rolls must be only partially inflated (80% full) and left unused for
a period of 24 hours before first use. After the 24-hour waiting period, rolls can
be inflated to the maximum size and used. Failure to inflate properly can result in
roll deformation.
Rolls must be measured when inflating to insure the correct diameter of the
cylinder of the roll. Mark a line on the wall the distance from the floor that you
need your roll diameter to be. A size chart with conversions from centimeters to
inches is provided below:
User Height
Recommended
Roll Size
Approximate
Diameter at 80%
of Maximal
Inflation
Final Diameter
After 24 Hours
5’6” and shorter
50cm
40cm or 16.0"
50cm or 19.5"
5’7” and taller
60cm
48cm or 19.0"
60cm or 23.5"
