English
990000025
5-25-12 (REV:02)
Charge the battery pack only with the recommended
charger.
Connect the charger to a power supply. For ap-
proved power sources, refer to the operator’s
manual for the charger.
Make sure the battery pack is secured in the charger
before beginning operation.
Press down on the battery pack to be sure contacts
on the battery pack engage properly with contacts
in the charger.
The battery pack may become slightly warm to the
touch while charging. This is normal and does not
indicate a problem.
Do not place the charger and battery pack in an
area of extreme heat or cold. They will work best at
normal room temperature.
When batteries become fully charged, unplug the
charger from the power supply and remove the
battery pack.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may
become hot. A hot battery pack may be placed directly
onto the charger port but charging will not begin until
the battery temperature cools to within acceptable
temperature range. When a hot battery pack is placed
on the charger, the red LED will begin flashing and the
green LED will be off. When the battery pack cools
to approximately 120°F, the charger will automatically
begin charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the
charger port but charging will not begin until the battery
temperature warms to within acceptable temperature
range. When a cold battery pack is placed on the
charger, the red LED will begin flashing and the green
LED will be off. When the battery pack warms to ap-
proximately 32°F, the charger will automatically begin
charging.
BATTERIES
These batteries have been designed to provide maxi-
mum trouble-free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery
pack and attempt to replace the batteries. Handling
of these batteries, especially when wearing rings and
jewelry, could result in a serious burn.
To obtain the longest possible battery life, we sug-
gest the following:
Remove the battery pack from the charger once it
is fully charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is
below 80°F and away from moisture.
Store battery packs in a 30%-50% charged
condition.
Every six months of storage, charge the pack as
normal.
BATTERY PACK REMOVAL AND PREPARA-
TION FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains lithium-ion bat-
teries. Local, state or federal laws may
prohibit disposal of lithium-ion batteries
in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack’s terminals
with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove
any of its components. Lithium-ion batteries must
be recycled or disposed of properly. Also, never
touch both terminals with metal objects and/
or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
Fig. 1
PSL0BA121
PSL0CH121
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road
Anderson, SC 29625, USA
1-877-617-3501
www.powerstroketools.com
OPERATION
OPERATION
OPERATION
MAINTENANCE
