Power Storage Solutions 12MQ100 - 620, Руководство по установке и эксплуатации

Страница: 15 / 22

Correct string
with
l ow single cell
1. Equalization charge of the
battery
string : charge the battery at
upper limit voltage for 10 hrs , 3
discharge cycle s may be necessary
when c ondition is serious.
The difference of float
charge voltage between
single cell in a
string of
battery should meet the
below standard:
2Vseries 90mv
6vseries 240mv
12Vseries 480mv
.
Single cell should be replaced if it
fails in repair
2. On-line repair of single cell:
connect the cell the activation
meter or charger with the laggard
battery and charge the single cell.
Activation
charge and
discharge Charge and discharge the battery
by one cycle, then charge the
battery by the lower limit of the
equalization voltage About 30% of the rated
capacity is released. Produced this text on the batteries
which float charge more than 6
mo n ths but without discharge.
7.2.3 Yearly Inspection item s
A dditional to Q uarterly and M onthly M aintenance items :
Items Contents Standards Maintenance
Checking
discharge test
Cut off AC power supply,
discharge battery with load,
and discharging 30%
to
40% rated capacity.
Battery voltage should
be over 1.90V/cell
after discharging. If battery voltage is lower than standard
value, please equalization charge the battery
group after discharging and then float
charging it for 1
2 month, please contact us
if still have an issue
Capacity test Utilize a capacity test
instrument with load bank
discharge battery and
discharge 60~80%
of the
rated capacity
More than 80% of the
capacity is reserved.
Verify that string has at least 80% capacity.
Capacity test should only be performed
once every 5 years or when less than 80%
capacity is suspected.
pg.15
7.2.2 Quarterly Inspection items continued :
A dditional to M onthly M aintenance items :