Table 5. Summary Table of Tolerance Requirements
TI TOLERANCE
4.1.15 Voltmeter
0.2 Volts
4.1.16 Load current and TI internal shunt accuracy.
res ± 10 Amperes At 10.5V at 10 Seconds.
onds.
f. Only: 375A
375 Ampe
Note: Loaded Battery may not be 10.5 Volts in 10 Sec
Use following steps when battery voltage differs from 10.5
Volts.
(For Re
= 35 Amps/Volt)
TEP
. Note Difference From 10.5V
75
375
Amp
XAMPLE
Actual voltage reading 10.9, difference is +0.4
Amps
ptable: Test reading is
Amperes
***(4) If actual volts are 10.1 differences is -0.4 =
le
ps.
10.5V
S
1
2. Multiply Difference by 35
3. If higher than 10.5, add to 3
4. If lower than 10.5 subtract from
5. Acceptable Result must be the actual
reading ± 10 Amperes
E
STEPS
1.
2. 0.4 X 35 Amps =
+
14 Amps
3. 14 Amps + 375 Amps = 389
4. ***
5. Acce
389 ± 10 Amps = 379 to 399
-14Amps. Subtract from 375 Amps, Acceptab
reading is 361 Amps ± 10 Amps = 351 to 371 Am
TIME
13-17 Seconds voltage reading freezes
16-20 Seconds Drop-out of load, led off
5
