10
Fault Conditions & Advisements
When the charge status LED flashes RED, a fault condition exists. A fault condition
requires immediate attention. When the status LED is solid or flashes ORANGE, you are
receiving an advisement about the battery.
The flash patterns for fault conditions are as follows:
LED Pattern
Fault Description
Flashes RED
1 Time
Indicates (A) low voltage battery failure or (B) battery has a short circuit. If (A), the
battery’s voltage is below the minimum level required and cannot be charged. If
(B), the battery is defective and should be recycled. This warning is provided after
the pre-charge stage is completed.
Flashes RED
2 Times
Indicates battery contact is “open” and current is not passing through the (+) and
(-) contacts on the battery. This warning is provided after the initial diagnostic
stage is complete. Check charging pod to confirm compatibility with battery.
Flashes RED
3 Times
Battery temperature is 45°C (113° F) or above. Charging has terminated, remove
battery from charger. Have battery checked by a qualified technician.
Содержание ENDURA EC12M
Страница 1: ...Twelve Unit Rapid Charger FOR RECHARGEABLE LMR RADIO BATTERIES User Manual Model EC12M ...
Страница 2: ......
Страница 19: ......