POWX0441
EN
Copyright © 2021 VARO
P a g e
|
6
www.varo.com
To install: When assembling the dust collection box, follow the above procedure in reverse
order.
8 TECHNICAL DATA
Rated Voltage
220-240V
Rated Frequency
50Hz
Rated Power
330W
Rotation speed
6000-11000min
-1
Cable length
3m
Sanding surface
115x230mm
Carbon brush motor
Yes
Oscillation speed
12000-22000min
-1
Soft grip
Yes
Hook&loop system
Yes
Self dust function
Yes
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
82dB(A)
Acoustic power level LwA
93dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
5.5m/s²
K = 1.5 m/s²
10 CLEANING AND MAINTENANCE
The machine does not require any special maintenance.
For safe and efficient working, always keep the machine and the ventilation slots clean.
Always be sure that the tool is switched off and unplugged before carrying out any work on
the tool.
11 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
