9
2
Power Tool Use And Care
1.
Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it is designed.
2.
Do not use power tool if switch does not turn it on or off.
Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
3.
Disconnect the plug from the power source and/or battery pack from the power tool before
making any adjustments, changing accessories, or storing the tool.
Such preventative
safety measures reduce the risk of starting the tool accidentally.
4.
Store idle power tools out of reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Tools are dangerous in the hands
5.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged, have
the power tool repaired before using.
Many accidents are caused by poorly maintained tools.
6.
Keep cutting tools sharp and clean.
Properly maintained tools with sharp cutting edges are
less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in a manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed.
Use of the power tool for operations
different from those intended could result in hazardous situation.
Service
1.
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Cleaning
WARNING:
RISK OF PERSONAL INJURY.
Always disconnect tool from power source before
making any adjustment, installing or changing accessories.
1. Clean the tool housing and motor vents after each use.
2. Keep the grip dry, clean and free from oil and grease.
3. Store the tool on a safe and dry place, out of reach of children.
4. Do not use cleaning agents or solvents that could attach the plastic parts of the tool.
5. Turn the tool off immediately and do not operate, until repaired, if tool begins to make
abnormal noise, vibrations, produces smoke or burning odor.
Service
WARNING:
Tools service must be performed only by qualified repair personal. Service or
maintenance performed by unqualified personnel could result in a risk of injury. When
servicing a tool, use only identical replacement parts. Follow instruction in the maintenance
section of this manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
Contact World Factory, by phone at 1-888-424-3354, or be E-mail at
[email protected], for the location of the nearest authorized power tool
service center.
Recommended Accessories:
1. Sandpaper
MAINTENANCE
ACCESSORIES