V4.0
14 in. Electric Wet/Dry Concrete Saw
8957102
Visit www.princessauto.com for more information
15
OVERLOAD PROTECTION, OVERHEAT
PROTECTION
OVERLOAD & LOAD WARNING LAMP
When full load is reached, the load
warning lamp will flash red. If full load
is exceeded and sustained for too
long, the motor will shut down and
the load warning lamp will glow solid
red. In this case, the motor must be
first shut off and then restarted. When
this happens, the motor will very
likely be near overheating, so it is also
a good idea to run the motor at no
load for a few minutes to cool it
before continuing.
OVERHEAT THERMAL PROTECTION
If the temperature of the motor gets too high, the thermal protection will shut
the motor down. The switch must be first shut off and then restarted. When this
happens, do not immediately start cutting after restarting the motor. Always run
the machine at no load for a few minutes to return to a normal operating
temperature before continuing.
CAUTION: The motor will be
damaged if it is repeatedly
overloaded or overheated.
Always cool the motor by
running at no load for a few
minutes whenever it stops
from either overheat or
overload. Connecting to
vacuum cleaner
When you wish to perform
cleaner operation, connect a vacuum cleaner to your tool. Connect a hose of
