Power Fist 9049073, Руководство пользователя

Страница: 12 / 32

9049073 Li-ion Cordless Heat Gun V1.0
12 For technical questions call 1-800-665-8685
b. Consider cutting the linoleum into strips and concentrate on
removing each strip to simplify the job.
2. Pull the covering until a section lifts away from the subfloor.
3.
Redirect the airflow directly against the point where the flooring meets
the subfloor and continue to peel until the covering is removed.
4. Heat the remaining glue and remove with a scraper.
REMOVING ADHESIVE LABELS
Heat the label in short bursts. Pull the label away from the workpiece,
reapplying heat when the adhesive begins to cool.
When the label is removed, heat the workpiece area and lightly scrub with a
non-marring pad or eraser to remove the remaining adhesive.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Keep the tool handles clean, dry and free from oil/grease at all times.
4. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1. Clean residue and debris from the nozzle before using the tool. The debris
can ignite when heat is applied.
2. Clean dust and debris from the air vents (B) with a small brush. Hold the tool
so the debris will not fall inside the vents. Air must flow through the tool
unimpeded. Clogged vents will cause the tool to overheat. The tool may fail or
reach a higher temperature than intended and damage the workpiece.
3. Clean the housing with a damp cloth after work is complete and allow to
air dry before reusing.