V1.0
20V Li-ion Cordless Reciprocating Saw
9049057
Visit www.princessauto.com for more information
15
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Possible Cause(s)
Suggested Solution(s)
The saw will not
start.
1.
Supplied power is
interrupted.
2.
On/Off switch is faulty.
3.
Motor components are
short-circuiting or are
defective.
4.
Motor has overheated.
5.
The battery is not
installed correctly.
6.
Battery power
depleted.
7.
Battery is worn out.
1.
Check that power supply is
still available.
2.
Replace faulty switch.
3.
Have a qualified technician
service the tool.
4.
Allow motor to cool before
attempting to use.
5.
Clean battery contacts
individually to avoid a shock.
Then install the battery
correctly. Make sure the
polarity matches and the
battery locks into place.
6.
Follow instructions to charge
the battery in Care &
Maintenance.
7.
Replace with a new battery
from the same manufacturer.
Dispose or recycle your old
battery according to your
local municipal bylaws.
Motor starts slow
and doesn't reach
operation speed.
1.
Motor is damaged.
2.
The battery has
insufficient charge.
3.
Battery is worn out.
1.
Have a qualified technician
service the tool.
2.
Follow instructions to charge
the battery in Care &
Maintenance.
3.
Replace with a new battery
from the same manufacturer.
Dispose or recycle your old
battery according to your
local municipal bylaws.
