Power Fist 9011438, Инструкция по эксплуатации

Страница: 12 / 36

5. Lift the tool away from the workpiece when done.
6. Switch the tool OFF once the current task is complete.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components.. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool. Follow instructions
for changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
6. Check the carbon brushes periodically. Replace brushes when they have
about 1/4 in. remaining or the brush displays signs of breakage, crumbling
or burning. Check that the new brushes can move freely in the brush
holder. Run the motor for 15 minutes without load to shape the brushes,
so that they are properly aligned with the commutator.
7. Clear the vents of any dirt, dust and debris on a regular basis to prevent
the tool from overheating.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
9011438 CORDLESS ROTARY TOOL KIT, 40 PC V1.0
www.princessauto.com / 1-800-665-8685 Page 12