Power Fist 9004391, Руководство пользователя

Страница: 15 / 40

TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s) Possible Cause(s) Suggested Solution(s)
Tool runs at normal
speed, but loses
power under load. 1. Motor parts worn. 1. Have a qualified technician service
the tool.
2. Replace tool or parts.
Tool runs slowly.
Air flows slightly
from exhaust.
And/Or
Air flows slightly
from nozzle. 1. Motor parts jammed
with dirt particles.
OR
Airflow blocked by
dirt.
2. Air regulator in closed
position.
3. Damage or excessive
wearing of internal
parts.
1. Check air inlet filter for blockage.
a.
Pour air tool lubricating oil into
air inlet as per lubrication
instructions for clearing
shipping grease.
b. Operate tool in short bursts to
clear debris.
c. If tool still jammed, clean tool
and lubricate per lubrication
instructions.
2. Open the air regulator to desired
airflow.
3. Have a qualified technician service
the tool.
a.
Replace tool or parts.
Tools will not run.
Air flows freely
from exhaust. 1. Damage or excessive
wearing of internal
parts. 1. Have a qualified technician service
the tool.
2. Replace tool or parts.
Tool will not shut
off. 1. Throttle valve o-ring
dislodged from inlet
valve seat.
2. Trigger mechanism
jammed or dirty.
1. Replace throttle valve o-rings.
2. Clean trigger mechanism and
lubricate.
V1.0 EXTENDED REACH AIR CUT-OFF TOOL 9004391
Page 15 www.princessauto.com / 1-800-665-8685