V1.0
1,000 lb Motorcycle/ATV Table Lift
8880239
Visit www.princessauto.com for more information
7
IDENTIFICATION KEY
A
Wheel Rest
B
Wheel Clamp
C
Attachment Point
D
Platform
E
Moveable Plate
F
Ramp
G
Clamp Handle
H
Front Arm Support
I
Lock Bolts (2)
J
Caster (2)
K
Safety Bar
L
Pressure Release Pedal
M Foot Pedal
N
Hydraulic Pump
O
Wheel (2)
P
Rear Arm Support
OPERATION
Numbered references in parenthesis (#1) refer to the included Parts List. Letter
references in parenthesis (A) refer to the included Identification Key.
1.
Lower the platform (D) to the lowest position and check all nuts and
bolts for tightness.
2. Remove the moveable plate (E), then remove the oil filler screw (rubber
plug) on the hydraulic pump (N). Quickly pump the foot pedal (M)
several times to purge air from the hydraulic system till the lift can
raise. Restore the oil filler screw (rubber plug).
3.
Turn the lock bolts (I) until the casters (J) are slightly off the ground to
prevent the lift from rolling. Ensure the lift is level.
