8865107
Electric Stapler and Nailer
V1.0
6
For technical questions call 1-800-665-8685
a.
Inspect the tools power cord for cracks, fraying or other faults in
the insulation or plug before each use.
b. Discontinue use if a power cord feels more than comfortably
warm while operating the tool.
3.
Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch the plug with wet hands.
4.
Prevent damage to the power cord by observing the following:
a.
Do not pull on the cord to disconnect the plug from an outlet.
b. Keep the cord away from heat, oil, sharp edges or moving parts.
c.
Never use the cord to carry the tool.
d. Place the electrical cord in a position that prevents it from coming
into contact with the tool and getting caught by the workpiece.
The cord should always stay behind the tool.
5.
Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a.
Position power cords away from traffic areas.
b. Place cords in reinforced conduits or place planks on either side of
the power cord to create a protective trench.
6.
Do not wrap the cord around the tool, as sharp edges may cut insulation
or cause cracks if wound too tight. Gently coil cord and either hang on a
hook or fasten with a device to keep cord together during storage.
POWER TOOL PRECAUTIONS
1.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify
the power tool is operating correctly, before it can be used.
2. Do not cover the air vents. Proper cooling is necessary prevent damage
to the tool’s motor.
3.
Disconnect the power source before installing or servicing the tool.
4.
Never point the tool towards yourself. It could inflict an injury.
5.
Keep hands and fingers away from the work area. Any part of the body
contacting the tool’s working parts could result in an injury.
6. Hold the tool by the insulated gripping surfaces when performing an
operation where the tool may contact hidden electrical wiring. The
tool’s exposed metal surfaces may convey a shock to the operator from
a ‘live’ wire.
Содержание 8865107
Страница 9: ...V1 0 Electric Stapler and Nailer 8865107 Visit www princessauto com for more information 9 ...
Страница 10: ...8865107 Electric Stapler and Nailer V1 0 10 For technical questions call 1 800 665 8685 ...
Страница 11: ...V1 0 8865107 Please read and understand all instructions before use Retain this manual for future reference ...
