8667883
High-Lift Hydraulic Transmission Jack
V1.0
4
For technical questions call 1-800-665-8685
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use this
tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific function.
Do not modify or alter this tool or use it for an unintended purpose.
2. This jack is designed for use only on a hard, level surface capable of
sustaining the weight of the tool and load. A surface that does not meet
these requirements can result in jack instability and possible loss of load.
3.
Use a transmission jack of proper size and capacity to handle the
anticipated load. Do not overload beyond the jack’s rated capacity (see
Specifications). Overloading may cause damage to or failure of the jack.
4.
The vehicle must be properly supported and blocked before using the jack.
Set the parking brake to prevent it from moving or shifting.
5.
Keep hands, fingers and arms away from moving parts of the jack at all times.
6. Secure the load with the safety chain before lowering or moving the load.
7.
Before lowering the load, ensure that there are no obstructions
underneath and that all people are standing clear.
8. Lower the load slowly and avoid sudden starts or stops that may cause
the load to shift.
9. Only use with accessories rated to handle the forces exerted by this tool
during operation. Other accessories not designed for the forces generated
may break and forcefully launch pieces.
10. Check to ensure that all bolts and nuts are tight.
