Power Fist 8657025, Руководство пользователя

Страница: 6 / 20

8657025 48 in. Drum Fan V 4.0
6 For technical questions call 1-800-665-8685
b. Keep cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the device.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a. Position power cords away from traffic areas.
b. Place cords in reinforced conduits.
c. Place planks on either side of the power cord to create a protective trench.
UNPACKING
WARNING! Do not operate the device if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
• Assembled Drum Fan
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1)
refer to the included Parts List.
1. Insert a wheel (#17) into the wheel
shaft (#19). Align the hole in the wheel
shaft and the wheel axle (#18).
2. Insert a screw (#20) and tighten to lock
the wheel axle in place.
3. Repeat with other wheel.
OPERATION
1. Place the fan on a safe, flat surface where it cannot fall or be pulled by
the cord.
2. Plug unit into electrical outlet.