V4.0
600 lb Adjustable Steel Trailer Dolly
8656878
Visit www.princessauto.com for more information
5
5. Secure the trailer tongue to the coupler before removing the chocks
and moving the trailer.
6. Take precautions to prevent uncontrolled trailer movement once it is
connected to the trailer dolly. A sloped ground can cause gravity to
pull the trailer dangerously out of control.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the parts list are included.
Contents:
• 600 lb Adjustable Steel Trailer Dolly
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
1. Attach the tires (#9) to the base (#14) using
Ф
2.5 cotter pins (#7)
and
Ф
16 flat washers (#8). Insert the trailer hitch ball (#5) into the
support (#13) using a
Ф
16 flat washer (#8) Insert the assembly into
the base (#14) and secure using the PTO lock pin (#6).
2. Attach the second tow bar (#12) and the leg (#5) to the base using
M10x45 bolts (#1),
Ф
10 spring washers (#2),
Ф
10 flat
washers (#3) and M10 nuts (#4).
3. Attach the first tow bar (#11) to the second tow bar (#12) using
M10x45 bolts (#1),
Ф
10 spring washers (#2),
Ф
10 flat
washers (#3) and M10 nuts (#4). Attach the rubber handles (#10) to
the first tow bar (#11).
4. Tighten the connections before use.
