V4.0
8651598
Visit www.princessauto.com for more information
3
Soldering Iron
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator
must follow basic precautions to reduce the risk of personal injury and / or damage to the
equipment. Before allowing someone else to use this tool, make sure they are aware of all
safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. Common sense and
caution are factors that cannot be built into this product, but must be supplied by the
operator.
NOTE: Keep this manual for the safety warnings, precautions and operating, inspection and
maintenance instructions. When this manual refers to a part number, it refers to the included
parts list.
WARNING!
1. The appliance is not a toy, and must be kept out of children's hands.
2. Before cleaning the appliance or changing the filter, always remove the power lead
plug from the socket. Unscrewing the housing is not permitted.
3. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
4. Return to professional for cord replacement or service.
On first use, the soldering iron may produce smoke; this is just grease used in manufacturing
burning off, it is not harmful to the product or user.
1. The construction of the soldering station meets Protection Level I. Ensure the ground
conductor is not disconnected and the product is only connected to grounded
sockets.
2. Keep electrical appliances and accessories away from children! They are not toys.
3. Never use the product immediately after it has been brought in from the cold into a
warm room.
4. Condensation might destroy your device; Wait until the product is at room
temperature before use. Never touch the appliance with damp or wet hands; there is
the risk of a dangerous electrical shock.
5. Make sure to have sufficient ventilation while soldering; solder or solder flux can be
harmful.
