V 4.0
8549024
Visit www.princessauto.com for more information
3
4 pc
Ratcheting Pipe
Threader Set
SPECIFICATIONS
Model
8549024
Handle length
18"
Die Sizes
1/2” (14 TPI), 3/4” (14 TPI), 1” (11.5 TPI)
WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious
personal injury.
WARNING: It is important that you read the entire manual to become familiar with this
product before you begin using it.
WARNING: This machine is designed for certain applications only. The distributor strongly
recommends that you do not modify or use this machine for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO
NOT use the machine until you have first contacted the distributor to determine if it can or
should be performed on the product.
INTENDED USE
The RATCHETING PIPE THREADER SET is designed for threading pipes and has three different
threading dies ranging in size from 1/2” to 1".
SAFETY
GENERAL SAFETY RULES
When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious bodily injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood
by the operator that common sense and caution are factors that cannot be built into this
product, but must be supplied by the operator.
