8532293
Combination Belt and Disc Sander
V4.0
12
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord periodically.
Have damaged or worn components repaired or replaced by an authorized
technician. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Although the sander does not require user maintenance, the sander should
be kept clean. Wipe the sander with a clean cloth and periodically blow out
all areas with compressed air or use a brush. Do not use harsh chemicals
or solvents to clean the sander. These chemicals could seriously damage
the plastic housing.
7. Although attaching a dust collection, sanding dust may accumulate behind
the bracket cover. Therefore, remove the cover as described from time to
time and clean the interior with a brush or vacuum cleaner.
8. Avoid overloading the sander. Overloading will result in considerable
reduction of speed and efficiency and the unit will become hot. In this
event, run the sander at a “no load” condition for a minute or two.
9. Regularly inspect all mountings and screws to ensure tightness. Should
any screws become loose, tighten immediately.
10. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
