V4.4
120V AC Electric Jackhammer Kit
8520892
Visit www.princessauto.com for more information
5
7. When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
8. This device is only for use on 120V (single phase) and is equipped with a
3-prong grounded power supply cord and plug.
9. DO NOT use this device with a 2-prong wall receptacle.
a. Choose an available 3-prong power outlet.
b. Replace 2-prong outlet with a grounded 3-prong receptacle, installed
in accordance with the CE Code and local codes and ordinances.
WARNING! All wiring should be performed by a qualified electrician.
ELECTRIC POWER TOOL PRECAUTIONS
1. Do not use a power tool with a broken or inoperative trigger/power switch
or safety guard.
2. Make sure the power switch is in the OFF position before connecting the
tool to the power supply.
3. Do not place the tool down until the bit has stopped moving.
The bit may catch the surface of work material and wrench itself free,
causing injury to the user or others in the work area.
4. Never use a tool with a cracked or worn bit. Change the bit before using.
5. Always use both hands when operating the tool, unless the tool is designed
for single hand use.
6. Hold tool by insulated gripping surfaces when performing an operation
where it may contact hidden wiring or its own cord. Contact with a ‘live’
wire will electrify exposed metal parts and shock the operator.
7. Before using the tool on a workpiece, test the tool by running it at the
highest no-load speed for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling that could
indicate poor installation of the bit. Check the tool to determine the cause.
8. Do not allow the tool's motor to overload and/or overheat by taking
work breaks.
9. When the tool is in operation, keep hands away from the bit and the area it
is being applied to.
