V4.1
2 in. Gas Water Pump
8509978
Visit www.princessauto.com for more information
13
1. Remove priming plug from top
of pump.
2. Fill pump with clean, clear water up
to top of discharge outlet.
3. Replace priming plug.
START THE ENGINE
WARNING! Failure to follow the steps below will result in rapid retraction of
the starter cord faster than the user can let go. This will pull the user’s
hand and arm toward the engine, possibly resulting in serious injury.
1. Ensure spark plug, muffler, fuel cap and air filter are in place. Do not crank
engine with spark plug removed.
2. Move the fuel valve lever to
the ON position (Fig. 9-1).
When the valve lever is in the
ON position, fuel is allowed to
flow from the fuel tank to the
carburetor.
3. Push the switch to the ON
position (Fig. 10-1).
4. Move the throttle lever to the
FAST position (Fig. 10-2).
5. Move the choke lever to the
CLOSED position (Fig. 11-1).
The choke is used to provide an
enriched fuel mixture when
starting a cold engine. It can be opened and closed by operating the choke lever
manually. The choke is usually unnecessary when restarting a warm engine.
6. Pull Start
a. Pull the recoil starter handle lightly until you feel resistance.
b. Pull the recoil starter handle briskly as soon as resistance is felt.
c. Do not allow the recoil starter handle to snap back against the engine.
Instead, return the starter grip gently by hand.
Fig. 9
Fig. 10
Fig. 11
Fig. 8
