6
For technical questions call: 1-800-665-8685
V 3.04
8500613
Digital Laser Tachometer Combo Set
IDENTIFICATION KEY
A
Signal light beam aperture
B
Measure button
C
Display window
D
Hold button
E
Function switch
F
Battery cover
G
Contact tach spindle
H
Speed measurement adapters
I
Reflective mark (not shown)
ASSEMBLY
When this manual refers to a part number, it refers to the included Parts
Identification section.
Attached a speed measurement adapter by inserting the contact tach spindle
(G) into the opening of the adapter. A metal tab on the spindle will fit into a
slot on the adapter. Firmly seat the adapter before use.
OPERATION
The tachometer will take a measurement (non-contact or contact) and store
the values in memory for review.
1.
Press the measuring button (B) to begin measurement.
2.
Release the measuring button to end measurement. All
measurement results are automatically stored.
3.
Press the Hold button (D) and to show the Max. value, the Min.
value and the Last value.
