4
For technical questions call: 1-800-665-8685
V 4.0
8469462
2 pc 300 lb. RV Stabilizer Jack
3. Maintain tools with care. Keep tools clean and in good condition for a better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect tool
fittings and alignment periodically and, if damaged, have them repaired by an authorized
technician or replaced. The handles must be kept clean, dry and free from oil and grease
at all times. A properly maintained tool reduces the risk of binding and is easier to control.
Applying excessive force can lead to slips and damage to your work piece or personal injury.
4. Only use the lubricants supplied with the tool or specified by the manufacturer. Other
lubricants may not be suitable and may damage the tool.
5. When not in use for an extended period, apply a thin coat of lubricant to the steel parts to
avoid rust.
6. Maintain the label and nameplate on the tool. These carry important information. If
unreadable or missing, contact Princess Auto for a replacement.
UNPACKING
1. Carefully remove the device from the package.
a. Retain packing material until you have carefully inspected and satisfactorily installed or
operated the device.
2. Inspect the parts carefully to make sure the device was not damaged while shipping.
WARNING! If any part is missing, do not operate the tool until the missing parts are replaced.
Failure to do so could result in serious personal injury.
INSTALLATION
Fig. 1
Fig. 2
BOLT ON METHOD
1. Use two 3/8 in. - 16 x ¾ in. Grade 5 hex head screws, nuts and lock washers
(sold separately).
2. Bolt to the camper or trailer side rails, under the side rails, or to the underside cross
members. See figure 1
