3
For technical questions call: 1-800-665-8685
V 2.0
8382988
Battery Charger with
2A Trickle Charge
SPECIFICATIONS
Charging Current
2 amperes
Input Voltage
120/240 volts
Output Voltage
12 volts
Charging Method
3-stage trickle charge
Status Indicators
Red, Yellow, and Green LED lights
Additional Protection
Short circuit and polarity protection
INTRODUCTION
This high frequency, smart and intelligent battery charger is designed for all 12V lead-acid batteries. It provides a
trickle charge to keep a battery at constant peak working level. This battery charger has a charge rate of 2AMP. It
is designed for charging only 12V lead-acid batteries for conventional automotive, maintenance-free, marine deep
cycle and gel-used in cars, farm equipment, boats, RVs and SUVs, lawn mower/garden tractors, motorcycles,
personal watercraft, snowmobiles, and ATVs.
FEATURES
• Automatic float charge monitoring
• Charge rate LEDs
• High Frequency IC controlled: Provide pure DC regulated output current, three stage charging and good
performance for a maximum, safety battery charge
• Rapid charging three-stage output
• Short circuit protection
• Heavy-duty cables and clamps are corrosion-resistant
• Connect to side or top-mount battery terminals
• Automatic battery maintenance to keep the battery in best status
CONTROLS AND INDICATORS
There are three LED indicators on this battery charger. They are Green, Yellow, and Red.
• Green: When you plug the extension cord to a GFCI protected 120V outlet, the Green LED will be lit, which
means the charger is plugged in.
• Yellow: When you are charging a battery, the Yellow LED will be lit, which means the charging process is
proceeding. It will turn off after the battery is charged.
• Red: When you plug the extension cord to a 120V outlet, the Red indicator is lit, which means that the
battery cannot be charged, because the battery voltage is either too low or the battery is not connected
properly. Charger cannot charge batteries with less than 9V.
