Power Fist 8353229, Руководство пользователя

Страница: 11 / 36

V4.0 1 HP Mini Dust Collector 8353229
Visit www.princessauto.com for more information 11
6. When installing the carbon brushes make sure the carbon portions of the
carbon brushes contact the motor armature, and that the springs face
away from the motor. Also, make sure the springs operate freely.
7. Replace the brush caps. Do not overtighten.
8. Run the tool for a while to help shape the new carbon brushes.
WARNING! Do not collect sawdust or debris while breaking in the carbon
brushes. New carbon brushes tend to spark when first used until they wear
and conform to the motor's armature. A spark can ignite the collected dust
causing a fire or explosion.
EMPTYING THE BAG
WARNING! Wear a respirator and safety glasses when removing, emptying or
replacing collection bags. The contents can suspend in the air and enter the
eyes or lungs, causing an initial discomfort and possible respiratory
problems in the long term.
1. Unplug the tool and remove the key from the lock out switch.
2. Loosen the hose clamp (#19) enough to allow the bag to be slipped off.
3. Pull the bag slowly off the tool’s exhaust. Squeeze the bag opening closed
to prevent the sawdust from releasing.
4. Tie the bag’s opening if the entire bag is being disposed of.
5. Empty the bag slowly into a container to prevent a cloud of sawdust from
forming. Dampen the sawdust in the container from time-to-time to keep
the dust down.
a. You may also empty the sawdust into a compost heap, if the sawdust
does not have chemical or natural toxins. Check with your material
supplier. If in doubt, empty into a container for disposal.
CLEANING
Follow the same safety precautions for Emptying the Bag.
1. Unplug the tool and discharge any static electricity.
2. Remove debris from the inlet safety screen.
3. Blow out the tool’s internal mechanism with compressed air to dislodge
any trapped sawdust.
4. Clean the outer surfaces with a clean, damp rag.