3/8 in. Reversible Composite Air Drill
14
For technical questions call: 1-800-665-8685
8344525
V 2.6
MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will
prevent unnecessary problems.
2. Keep the tool handles clean, dry and free from oil/grease at all times.
3. Follow instructions for lubricating and changing accessories.
4. Inspect the tool fittings periodically. Have damaged or worn components repaired or replaced
by an authorized technician.
5. Inspect the tool fittings, alignment and hoses and power supply cord and components
periodically. Have damaged or worn components repaired or replaced by an
authorized technician.
6. Sharp tools are safer than dull tools. Applying excessive force while using a dull tool can lead to
slips and cause damage to your workpiece or personal injury.
7. Maintain the tool’s label and name plate. These carry important information. If unreadable or
missing, contact Princess Auto Ltd. for replacements.
CAUTION! Only qualified service personnel should repair the tool.
LUBRICATION
Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants may not
be suitable and may damage the tool or cause a malfunction during use.
Use an air line lubricator with air tool oil, available at your local Princess Auto Ltd, adjusted to two (2)
drops per minute. If an air line lubricator cannot be used, add air motor oil to the inlet once a day.
CAUTION! NEVER use a penetrating oil to lubricate the tool. Penetrating oil may act as a solvent that
will break down the grease and cause the tool to seize up.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust.
Remove the lubricant before using the tool again.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate
recycling facility.