Specifications
• 18 V Ni-CAD battery
• 0 to 900 RPM
• 3/8" keyless chuck
Changing the saw blade
• First, become familiar with the saw components and their set-up. Undo the blade retaining hex screw
using the supplied hex wrench. Remove the screw, pull off the blade clamp, and the blade to be
replaced. Place the new saw blade into the larger slot on the clamp and align the hole in the jig saw
blade with the hole in the clamp. Place the jigsaw and clamp assembly onto the motor arm, making
sure all 3 holes are aligned. Insert the hex screw and tighten. Ensure the jigsaw blade teeth are facing
outward.
Cutting angle
• The base plate of the jigsaw can rotate up to 35° for angled cuts. To adjust the cutting angle, loosen
the base plate angle adjustment screw. Tilt the base plate to the desired angle. Retighten the
adjustment hex screw.
Cutting
• Before use, ensure that the work piece is clamped firmly in place. Depress the trigger locking button
and the on/off trigger simultaneously to begin blade operation. Allow the blade to come to full speed
before starting a cut.
Detail sander parts identification
a)
On/off trigger
b)
Handle
c)
Sanding plate
d)
Hook and loop sanding pad
e)
Battery pack location
for any technical questions, please call 1-800-665-8685
3
